The UPLIFT 920 Solid Wood No-Crossbar Height-Adjustable Standing Desk sets the bar for electric desks by including a digital memory keypad and heavy lifting capacity - without a crossbar! The UPLIFT 920's crossbar-free design allows for easy installation of a keyboard tray, while maintaining the stability and reliability of our UPLIFT series.
Our customers are saying...
|Height range including desktop thickness||25" - 51"|
|Travel speed||1.5"/second (varies - slowest with maximum load) with soft start/stop actuator motors|
|Sound Level||50 decibels during motion|
|Weight capacity||355 lbs|
|Desktop weight||Cedar: 4.4 lbs/sq ft
Mesquite: 8 lbs/sq ft
Alder: 4 lbs/sq ft
Ash: 7 lbs/sq ft
Cherry: 5.3 lbs/sq ft
Natural Maple: 8.1 lbs/sq ft
Walnut: 5.6 lbs/sq ft
Premium Bamboo: 6.1 lbs/sq ft
Pecan: 9.3 lbs/sq ft
White Oak: 7 lbs/sq ft
|Desktop thickness||Bamboo - 1.5'' thick
Solid wood - 1.75'' thick
|Desktop width||60" W - 80" W|
|Base width||Adjustable from 42.25" - 70" W|
|Memory Switch||4 programmable memory presets with digital desk height readout|
|Adjustable foot leveling studs||3/8" adjustment for uneven flooring|
|Voltage||Input: 110 V
Output: 31 V
|Transformer power||200 W (0.2 W on standby)|
|Power supply current||5 amps|
|BIFMA/ANSI X5.5-2008 Certified||Yes|
|Warranty||7-year all-inclusive warranty on the entire desk base, which includes the motor, frame, controller, switch, electronics and mechanisms. Optional extended warranty available when selecting desk options|
*Please note that the up, down and memory keys on the keypad included with the desk frame operate as follows: The four memory keys allow the desk to move to one of four preset vertical positions with just one touch, meaning you do not have to hold down a numbered memory key to make an adjustment to a saved position. Please be sure there is adequate clearance above and below your desk, and check cord lengths to insure adequate length of all cords before adjusting the desk height using the memory keys. Or you can simply push and hold down one of the up/down keys until you reach your desired height, if you don't wish to use the preset memory keys.
Download more information
UPLIFT 900 Series Desks completely meet all requirements of BIFMA/ANSI X5.5-2008 Test Sections 4.3, 4.5, 5.2-5.5, 6.0, 7.0, 8.0 & 15.0. We encourage you to compare our quality to anyone else's. With UPLIFT Desks, quality is our primary objective!
Why is UPLIFT priced so low?
Many people ask us how we can afford to sell our high quality UPLIFT line of Height Adjustable Standing Desks and Accessories for such a low price. The answer is simple. With over 12 years experience in the standing desk industry, we have established industry-wide relationships with quality, cost-efficient component manufacturers. Our philosophy is to expand the standing desk to a wider audience by streamlining production - eliminating middle men - and building UPLIFT products in our plant. UPLIFT Desks are assembled in Austin, Texas, and parts are sourced both globally and locally. Enjoy our selection. We know you'll love UPLIFT products - we hope to see you back as a repeat customer!
Local Austin musician and SXSW performer Zac Kellogg uses the UPLIFT Desk to write his music. Click the video below to see why he thinks the UPLIFT height-adjustable desk makes the best workspace.
See our UPLIFT 900 Electric Sit-Stand Desk in action below.
Check out our video of the UPLIFT 920 No-Crossbar Height-Adjustable Standing Desk.
Want to know how easy it is to assemble an UPLIFT 900 series desk? Check out the video below!
See what percentage of your desktop surface area actually falls within your Optimal Reach Zone.
UPLIFT 920 Sit-Stand Desks are available in the following standard sizes. Call us at 800-531-3746 for a quote on a custom size wood desktop up to 96'' wide.
UPLIFT Desks are available in the following Solid Wood and Texas Native Wood stocks. All solid woods will use filler of various colors to fill in knots, bug-holes and imperfections in the wood. The filler is usually black, but other colors may be used at our woodworker's discretion.
Cedar is a beautiful and unique wood, and it is also fairly soft. Please note that applied pressure can result in indentations.
Please note: Certain woods can look lighter when they are new, but will darken over time. Cherry, mesquite, and walnut are especially prone to these natural variations, see a comparison below. Give us a call if you'd like more detailed information: 800-531-3746.
The Cedar and Mesquite Native Wood desktops are available with three different shape options -- Square, Bark Line Front and Square Back, and Bark Line Front and Back. All other Solid Wood desktops are only available Square.
Sides are always square, corners are never sharp, and corner and edge details are as shown in the photos below.
If you want a more consistent surface with less filler, select a Square desk finish. Desks with a straight edge have fewer desk edge imperfections because we cut away the character that exists near the bark of a tree.
If you choose the Bark Line option, you may notice that your desktop has more character towards the outer edge. The Cedar wood with barkline is fairly uniform so you will see wood grain and bark contours. The Mesquite wood barkline is more prone to bug trails. We use a clear or black filler where bug trail marks or cracks occur in Mesquite. If you are selecting the Mesquite wood surface, you can expect some character and filler in the wood at the front edge like in the image below. Note that every desk varies, but customers that visit our retail store always love these tops with slightly more people favoring the Mesquite top aesthetics. Most people do order the barkline option as it makes the desk look unique and helps add a natural feel to your work space.
The UPLIFT 920 Solid Wood Sit-Stand Desk is available with three different base color options -- black, silver and white.
The Advanced Wire Management Kit is a complete cable organization system for your height-adjustable desk. We developed this kit after years of desk installations. It's a proven way to easily manage all computer and electric desk cords. The kit includes the following:
Click the video below to get some helpful tips on making the most of your UPLIFT Advanced Wire Management Kit:
The included cable organization tray forms the crux of your wire management solution with a sleek, black design that seamlessly blends with your desk's design and mounts securely to the desktop with two self-tapping wood screws or a strip of included double-sided tape. At 3.6'' wide, this tray is wide enough to accommodate cords, power supplies and the included power strip, minimizing below-desk clutter. While we recommend adding the entire advanced wire management kit for a full cable management solution with the most customization, this wire management tray portion of the kit can also be added to your desk order on its own.
10 self-adhesive wire mounts and 100 single-use cable ties allow for cables to be bundled and pulled taut against the bottom of the desk, eliminating hanging wires.
As your workstation develops over the years, it's likely that you'll need to re-bundle wires for routing or storage inside the wire management tray. A set of 10 reusable cable ties is also included, allowing for modification of cable bundling as needed without needing to replace individual cable ties.
Additionally, the Advanced Wire Management Kit provides a desk-to-wall cable organizer to organize wires running from an outlet or equipment to your desk in a single bundle. The desk-to-wall cable organizer's heavy-duty "spiral" design protects the cables inside from wear and tear, while also allowing cables to be integrated into the organizer or removed from it easily. An included quick wire add/remove tool rapidly and efficiently routes cables into the organizer.
Grommet holes can be added to your UPLIFT desk to allow for through-desk cable routing or monitor arm mounting, or can include a power grommet with two AC power outlets. The holes can be drilled at the rear edge of your desk on either the left, right or center, or a combination of the three. Corner desk grommet holes are drilled 3.5'' from the left or right side and 2.5'' from the rear edge, with central grommet holes placed in the center of the desk 2.5'' from the rear edge. For custom grommet hole positions, please call us at 1-800-531-3746.
Each grommet hole includes your choice of a black or chrome grommet hole cover, or an UPLIFT Power Grommet. Black grommet hole covers feature flip-top tabs that cover the cord slot when not in use. UPLIFT Power Grommets feature two UL-approved power outlets, a small hole for wires, and a 58" cord. These power grommets give you easy outlet access for peripherals, and allow power sources to move up and down with your desk when going from sitting to standing. Standard grommet holes with covers are 3" in diameter, and power grommets are slightly larger at 3.125" wide to accommodate your outlets.
The UPLIFT 920 Standing Desk can be ordered with optional casters. The casters come in a set of four - two for each leg. They can be locked to keep the desk stationary, but easily unlocked when you need to roll the desk.
Please note: the casters will add approximately 1.5 inches of height to your desk.
The attached stands that typically come with a new monitor are not ergonomic or adjustable; using a monitor arm will allow you to maintain good posture, avoid eye strain, control monitor position and save desktop space. Most people who purchase a monitor arm come back and say they should have done so years ago.
The UPLIFT Monitor Arm is a stylish, pneumatic monitor arm that provides complete fingertip adjustment for height, depth and lateral movement with an adjustable counterbalance system that allows for easy movement. If you are looking for a dual monitor solution, we also offer the UPLIFT Dual Monitor Arm, with the same great intuitive adjustment.
Add an UPLIFT Sit-Stand desk mat to your desk order, and receive an additional discount off the regular mat price. Our UPLIFT Sit-Stand anti-fatigue desk mats are extremely durable and comfortable. The padding is an inch thick and the surface is puncture-proof to withstand high heels or even the wheels of your chair. Choose from a 2' x 3' size or a 3' x 5' size.
Note: If you wish to use your UPLIFT Sit-Stand desk mat as a chair mat as well, you will need the 3' x 5' size.
When using a sit-stand desk, we recommend mounting your computer beneath your desktop to prevent cables from being stretched and pulled out of their ports when moving the desk from sitting to standing positions. We don't recommend leaving your CPU on the floor, as most cords aren't long enough to stretch from a computer placed on the floor to the standing height of your desk. While one option is to place your CPU on top of your desk, a CPU holder allows you to securely attach your computer tower to the bottom of your desktop to free up desk space. For an adjustable CPU holder at a discounted price when bundled with this desk, our own UPLIFT CPU Holder features a 360° swivel mount and a gliding track mechanism for easy access to your computer.
Click the video below to see the many features and benefits of the UPLIFT CPU Holder:
An ergonomic keyboard tray is an excellent accessory for your UPLIFT desk, giving you the freedom to adjust the height and tilt of your keyboard independently from the desk. A keyboard tray will also relieve the strain caused by over-reaching to type and is an excellent way to manage repetitive stress issues. An UPLIFT Desk is available with your choice of two keyboard trays. The UPLIFT Large Keyboard Tray comes with one, 27'' wide surface for your keyboard and mouse to sit side-by-side. For those who prefer more flexibility, the UPLIFT Switch Keyboard Tray comes with two surfaces: a 19.75'' wide platform for the keyboard and a separate 9'' diameter surface for the mouse. The mouse platform can easily move to the left or right side for ambidextrous mousing, and is also depth adjustable, allowing you to position your mouse closer to your body or farther away without adjusting the rest of the keyboard tray.
Though they have different platforms, both keyboard trays offer the same intuitive adjustability, wide range of ergonomic features and simple installation. With their easy lift-and-release, knob-free locking height adjustment that adjusts a full 8'', wheel tilt adjustment, and easy-to-read height and tilt indicators, both UPLIFT Keyboard Trays allow you to position your keyboard and mouse in a healthy, comfortable spot, whether seated or standing. The 0.25'' thick phenolic keyboard trays both feature a removable foam palm rest, a foam mouse pad and a cord manager for easy routing of your cables. Either of the low-profile, heavy-duty platforms will get your keyboard and mouse even closer to your lap, allow for compact storage and comfortably fit most keyboard and mouse combinations. All necessary mounting hardware is included, with a standard 21'' track that allows for full, compact storage of your low-profile platform underneath the desktop when used with a desktop 50'' or wider. This high-quality keyboard tray system is available at a discounted price when bundled together with your UPLIFT desk.
UPLIFT Large Keyboard Tray specs
UPLIFT Switch Keyboard Tray Specs
Adding an UPLIFT Desk Modesty Panel & Cable Management will give your UPLIFT desk's minimalist design an extra level of privacy. This modesty panel easily attaches to your desktop, traveling with it as you move from sitting to standing height, and features a mesh pocket for convenient wire management. The UPLIFT Modesty Panel, available at a discount when bundled with your desk, will help increase under-desk privacy while maintaining your desk's clean, open design, and is available in three different sizes to correspond with our 48'', 60'' and 72'' desktops:
For a little bit of extra storage, add an UPLIFT Half Circle Desk Drawer at a discounted price when bundled together with your desk. This half-circle-shaped, swiveling drawer easily attaches to the underside of your desktop via a central mount and pivots in either direction, rotating out to give you quick and easy access to smaller accessories that you don't want cluttering up your desktop. Featuring pen and pencil trays, a notepad slot, a tape dispenser, and storage compartments, the 13.6'' W x 7.4'' D x 1.3'' thick UPLIFT accessories drawer will help keep your height adjustable desk cleaner and more organized.
The Raynor Evo Chair is an extra-comfortable executive task chair. Covered in soft foam and upholstered in stain-resistant fabric, this chair is at a significant discount when purchased with your UPLIFT Desk. You won't be sitting as often anymore, but it's still nice to have an attractive and functional chair.
The Muvman Sit-Stand Stool is virtually the perfect accessory for your standing desk. With this ''active seating'' solution, you can take short breaks with your desk at standing height, giving you a third option somewhere between sitting and standing. The Muvman Sit-Stand Stool offers a height adjustable seat, a built-in handle for portability, and a non-slip base for the maximum range of motion with exceptional stability.
Please note: The Muvman ''factory'' model is only available with a black vinyl seat and black base. Red microfiber seat cushion is only available with black base.
We also have a variety of other ergonomic stools that make a great accessory for your UPLIFT Standing Desk.
Maximize your focus and energy at your workstation by adding a LifeSpan treadmill to your UPLIFT 900 desk! Please note that if you intend to use a chair at the same desk as a treadmill, we recommend using a desktop that is 72'' wide or larger to accommodate both the chair and treadmill. Choose from one of the following three models:
Want to save even more? Check out our UPLIFT Treadmill Desk and save when you bundle an UPLIFT 900 desk with a LifeSpan treadmill!
We offer several different shipping options for your convenience and needs. Prices may differ depending on the circumstances, but you will always be contacted for prior approval in the event of any pricing discrepancies. Feel free to call us at 800-531-3746 with any questions not addressed below or to discuss further what delivery option will work best for you.
Your order ships on a pallet and will typically arrive 2 - 5 business days from shipment, depending on your location. When your order ships, we'll send tracking and freight carrier information, so you can check when it is scheduled to arrive. With the exception of Platinum level delivery, the products will remain in their original packaging with no assembly provided. Freight deliveries do not require a scheduled appointment beforehand. Once you receive tracking, you can call the freight company and ask for the 4-hour window when they expect to be in your area, and you can request that they call you when they are an hour from delivery. If you are unable to receive the shipment, or it has to be held in storage, fees may be incurred.
The delivery agent will pull up to your loading dock or office at ground level. From there, you are responsible for taking the items off the truck and into your business, either with the help of a forklift or a few of your employees. A solid wood desktop can weigh around 50-100 lbs, depending on the wood type, and a desk frame weighs about 70 lbs. The desktop, desk base and any accessories you order are packaged separately on the pallet, allowing you to break down the pallet and remove each part of your order individually. If you do not have a loading dock, we suggest upgrading to Business lift gate delivery below at no additional charge.
The delivery agent will park wherever is most convenient at your business and use a device to get the shipment off the truck and onto the ground for you. Sometimes they will have a pallet jack that, while unable to go up stairs or steep inclines, may be able to move the shipment a reasonable distance. However, for the most part you will still be required to get the shipment up to and into your office.
The delivery agent will park the freight truck in front of your residence, so you can cut the ties on the pallet and take the items off the truck and into your home. For most customers, this delivery method is manageable for two people. If you do not have a friend, family member or neighbor who can help, you can ask the delivery driver to help you lift and move the boxes to your house. Please understand that the driver is not required to assist, but, in our experience, kindness and a small tip go a long way. If you believe you will not be able to lift the items off the truck, we recommend selecting Residential lift gate delivery below. The desktop and desk frame are packaged separately on the pallet, allowing you to break down the pallet and remove each box individually from the truck and into your residence. A solid wood desktop can weigh around 50-100 lbs, depending on the wood type, and a desk frame weighs about 70 lbs. Any accessories you order are packaged separately and easy to manage. Once you are sure all boxes have been removed from the truck (including the desktop, which will be boxed up and protected between two plywood boards), we recommend you leave the pallet and plywood boards in the back of the truck, if the driver agrees.
Residential lift gate delivery is the same as the Residential standard freight delivery described above, but the freight truck has a device to get the shipment off the truck for you. As with Residential standard freight delivery, if you want extra help from the delivery driver (beyond removing your boxes from the truck) we recommend kindness and a small tip.
Limited access locations include schools, military bases, prisons, churches, nursing homes, hospitals, construction sites, storage units, remote farms or ranches, golf courses and country clubs, utility sites, or any business with specific requirements such as certain times when you can't accept deliveries. These locations can vary widely in receiving availability and capability. With a standard delivery, the delivery agent will pull up to your loading dock or office at ground level. From there, you are responsible for taking the items off the truck and into your business, either with the help of a forklift or a few of your employees. You can also upgrade to include lift gate services, in which the delivery truck has a device to get the shipment off the truck and to the ground for you. If any extra charges are incurred, we will inform you as soon as possible and will not proceed with the order until these charges are approved by you.
Estimated Canada freight delivery covers Business or Residential standard freight delivery to most locations in Canada. See above for what standard Business and Residential freight delivery entails. You may be subject to extra fees for remote locations; however, you will be notified by email if such charges occur, and we will not charge your card or ship your order until we receive consent for the additional charge.
Because this is an international freight shipment, it does require a customs broker. If you do not have a broker, we have negotiated better rates with one ourselves and can help set you up with them. Our broker's rate is $125, and they will also need to collect Canadian sales tax appropriate for your province. This freight delivery charge only covers shipping costs; you will be responsible for any duties, fees or taxes incurred. If you would like to provide your own desktop, the UPLIFT 900 Frame Only is available, and is much less expensive to ship to Canada.
If shipping to Alaska, Hawaii or outside of the US, we will contact you with a shipping quote. Your order will not be processed until shipping costs are approved. Transit time and delivery date varies.
Our free standard delivery works well for most people who order our desks. While receiving a freight shipment and assembling your desk may sound daunting, it's actually pretty straightforward. Visit our desk assembly instruction page to watch videos of the assembly and read more about our free delivery options. If you have special requirements and need to have your desk assembled or delivered to a specific area or room of choice, the following Platinum, Silver and Bronze white glove delivery options are available. These options require a four-hour delivery window between the hours of 9 AM and 5 PM, Monday - Friday. We'll send tracking once your order ships, and, once your shipment has arrived at its destination terminal and is prepared, the agent will call to schedule your four-hour window for delivery, or, in the case of Platinum services, assembly. Deliveries and installation outside normal business hours require prior arrangement and may incur additional fees. Please contact us if you need to schedule delivery or assembly outside of these times, or if your building requires a Certificate of Insurance. COI requirements may result in a fee of up to $50, and failure to alert us beforehand may delay delivery or assembly.
Bronze level delivery means that the delivery agent will bring your shipment up to the first dry area, such as a porch or garage, including up to two flights of stairs (15 steps per flight maximum; contact us for any additional flights). The products will remain in their original packaging with no assembly provided. This service can typically add 3-5 days to your delivery date.
Silver level delivery means that the delivery agent will bring your shipment into your room or office of choice, including up to two flights of stairs (15 steps per flight maximum; contact us for any additional flights). The products will remain in their original packaging with no assembly provided. This service can typically add 3-5 days to your delivery date.
Platinum level delivery includes delivery to your room or office of choice, as well as assembly of the desk and any desired accessories, including de-trashing services. This excludes chairs and wire management kits, any electrical or component hookups, or any other products ordered separate from this listing that ship separately. Please note that Platinum level delivery can add up to 1-2 weeks to your delivery date. If you need your desk sooner than that, you may want to opt for one of our other freight delivery levels without assembly. This service is not available on orders delivered to the state of California.
We are so confident in our product that we back each UPLIFT desk base we ship with a 7-year, all-inclusive warranty, which covers the frame, motor, controller, switch, electronics and mechanisms. You also have the option of upgrading to our 12-year, all-inclusive extended warranty. If you have any issues with your desk base within the warranty period, just give us a call, and we will ship you the necessary replacement parts free of charge. The warranty does not cover normal wear and tear of the desktop surface. Free shipping only available for United States addresses. You can read more details about our industry-leading warranty coverage on our UPLIFT Desk Warranty page.
Choose a free desk accessory when you purchase a full UPLIFT Desk:
Bamboo Top on UpLift desk
August 17, 2014
The table arrived in excellent condition very well packed and without dings of any kind. I can not go further with this review because after a month it still sits in my garage disassembled due to current remodeling. I'm confident that everything looks great so far though. I'll try to update this review as time allows.
Switching to a sit-stand desk doesn't mean your desk has to be boring! Our UPLIFT 920 Solid Wood Electric Sit-Stand No-Crossbar Desk pairs the beauty of natural wood with the reliability of our UPLIFT 920 bases. A crossbar-free design ensures compatibility with most keyboard trays, and a heavy duty lifting capacity will easily move any desk accessories you have. Add a natural wood top of your choice an you'll have a stunning desk that's both beautiful and ergonomically-friendly.
List Price: $2,038.00
Our Price: $1,409.00
List Price: $899.00
Our Price: $699.00
List Price: $759.00
Our Price: $469.00
List Price: $899.00
Our Price: $699.00