Shimpo DT-205LR & DT-207LR Handheld TachometersThese are highly versatile tachometers that suit a variety of applications. They can take contact readings using either the wheel that is included with the unit, or a cone attachment. Non-contact measurements are also possible, via the laser reading system which can measure RPM of any rotating mechanism with reflective tape attached. The tachometers offer you a choice of an LCD (DT-205LR) or an LED (DT-207LR) display for easy reading.
| Measuring range | 6 - 99,999 RPM |
| Accuracy | 1 RPM : 6 - 8,300 RPM 2 RPM : 8,300 - 25,000 RPM 0.006 % of reading 1 digit (or 2 RPM max.) : 25,000 - 99,999 RPM |
| Display | DT-205L: 0.47" (12 mm) high DT-207L: 0.4" (10 mm) high |
| Measuring units | RPM (on contact using adapter, included). For rate: YPM, mPM, FPM, IPM. For length: YRD, m, FT, IN use 6" circle wheel with 200L adapter |
| Memory | 13 readings are stored in memory and retained for 5 minutes (last, max., min., 10 extra measurements) |
| Display update time | 1 second (typical) |
| Detection | Laser diode |
| System control | Single-chip C-MOS microprocessor |
| Over range indicator | Flashing numerals |
| Voltage requirement | 2 AA 1.5V batteries |
| Low Battery Indicator | DT-205L: Flashing "LO BAT" display DT-207L: "B" display |
| Auto power shutoff | Yes |
| Battery Life (approx.) | DT-205L: 40 hours DT-207L: 25 hours |
| Operating temperature range | 32 - 113° F (0 - 45° C) |
| Construction | Die-cast aluminum housing |
| Weight | 0.8 lb (365 g) |
| Dimensions | 6.6" L x 2.4" W x 1.8" H (167.5 mm x 60 mm x 46 mm) |
| Warranty | 1 year |
This unit may be special ordered to work with a
12" wheel... contact us for pricing and availability?
Download more information
Two models are available, the DT-205LR with an LCD display and the DT-207LR with an LED display. See the table below for differences between the two models.
| Display | Low Battery Indicator |
Battery Life approx. |
|
|---|---|---|---|
| DT-205LR | LCD: 0.47" (12mm) H | Flashing "LO BAT" display | 40 hours |
| DT-207LR | LED: 0.4" (10mm) H | "B" display | 25 hours |
Each tachometer comes standard with a 6" measuring wheel. Users may optionally order an additional 6" measuring wheel or a second 6" measuring wheel with a grooved surface.
|
|